How to turn a film negative into a photo on iPhone
Put the negative on an even white light, photograph it straight from above with the iPhone Camera app, open the shot in EditMe so it is inverted, check the source and the frame, then tap Save. You get a new photo; the shot of the negative stays untouched.
What you need
- A film negative, colour or black and white, handled by its edges
- An even white light behind it: a light table, or the white screen of an iPad or a second phone at full brightness
- An iPhone with the Camera app and EditMe installed
- Optional: a tripod or holder, so the phone stays parallel to the negative
Step by step
Make an even light
Use a light table, or turn an iPad or a second phone into one. In EditMe open Settings, tap Photographing negatives: how it works under Help, then tap Open light table. The screen turns an even white. Tap it to show or hide the controls for White tone and Brightness, and choose full brightness.
Photograph the negative
Lay the negative flat on the light and hold the iPhone parallel above it. Shoot with the Camera app, straight from above and without flash. Macro mode works if you like. Leave a thin rim of light around the picture, because it helps EditMe find the frame.
Tell EditMe you shoot film
On the first start EditMe asks “What do you want to do?”. Choose “I shoot film”. If you chose “Make my photos look good” before, open Settings, find “Most of my photos are” under New photos and choose “Negatives, automatic”. EditMe asks iOS for access to your photos the first time it needs them.
Open the shot
In the library, tap the photo of the negative. EditMe opens it in the editor and inverts it. If it is unsure, a chip asks “Looks like a negative?”; tap Invert. With “Make my photos look good” still set, press and hold the photo and choose “Open as negative”.
Check the source
The chip at the top left names what EditMe found, for example “Color negative detected” or “Black and white negative detected”. If it is wrong, tap the chip and choose Color negative, Black and white negative, Regular photo or Slide in the Source menu. Press and hold the photo to see the negative briefly.
Set the frame
When EditMe finds the edge of the picture, a second chip appears: “Border removed” when it has applied the frame, or “Border found” when it only suggests one. Tap it. For a suggestion choose Apply or Dismiss. Adjust corners opens the Crop tool in Perspective mode, where you drag each of the four corners onto the corners of the picture. Undo takes an applied frame back.
Adjust the look
Open Looks in the tool strip below the photo to start from a finished film look, or Adjust for the sliders. Check the colours against the negative before you go on.
Save the photo
Tap Save at the top right. EditMe creates a new photo next to the original and closes the editor, and a bar with Share appears for a few seconds. The shot of the negative stays untouched.
Tips
- Up close, an OLED screen shows its pixel grid. Put a diffuser or a sheet of baking paper between the screen and the negative.
- Do not zoom in the Camera app, because it costs sharpness. The negative may fill only part of the photo, since EditMe finds the frame afterwards. Measured on an iPhone 15 Pro, the main camera does not focus closer than about 20 cm; other models differ.
- If the colours look off, open Adjust and find Calibration. Dmin (rebate) lets you tap the clear film at the edge of the negative to set Dmin precisely, which needs a bit of clear film in view.
- EditMe also has its own camera on iPhone: tap the plus button in the library and choose Photograph a negative.
Questions
Do I need a scanner to turn film negatives into photos with an iPhone?
No. The iPhone camera does the scanning. You need an even white light behind the negative, and EditMe can turn the screen of an iPad or a second phone into one with Open light table. Photograph the negative with the Camera app, then open the shot in EditMe, which inverts it.
Can I use the iPhone macro mode to photograph negatives for EditMe?
Yes. EditMe's App Store listing suggests photographing the negative with the Camera app, in macro mode if you like. Keep the phone parallel to the negative and leave a thin rim of light around the picture, so EditMe can find the frame.
Why does my converted negative look colourless or wrong?
The source is most likely wrong. Tap the chip at the top left of the editor and choose the right entry in the Source menu: Color negative, Black and white negative, Regular photo or Slide. The result is an interpretation computed on the device, so compare it with the negative before you save.
Does EditMe change the original photo of my negative?
No. Save creates a new photo next to the original, and the original stays untouched.