Ferdinand Drobik

How-to guides · EditMe

How to convert black and white negatives and slides on iPhone

Photograph the film on an even white light, tell EditMe what it is, then save. A black and white negative is inverted without colour. A slide is already a positive, so you choose Slide as the source and EditMe leaves it uninverted. Both end as new photos.

What you need

  • A black and white negative or a slide
  • An even white light behind it, such as a light table or the white screen of an iPad at full brightness
  • An iPhone with the Camera app and EditMe installed

Step by step

  1. Photograph the film

    Put the film on an even white light, hold the iPhone parallel above it and shoot with the Camera app, without flash. A slide is lit and photographed the same way as a negative. Leave a thin rim of light around the picture so EditMe can find the frame.

  2. Tell EditMe what you shoot

    Open Settings and find “Most of my photos are” under New photos. Choose “Black & white negatives” for black and white film, or “Slides” for slides. “Negatives, automatic” lets EditMe tell colour from black and white negatives by itself.

  3. Open the photo

    In the library, tap the photo. EditMe opens it in the editor. The chip at the top left names what EditMe took the picture for.

  4. Black and white negatives: check the source

    The chip should read “Black and white negative detected”. If it names something else, tap it and choose “Black and white negative” in the Source menu. Under Adjust you can also set the mode switch to Black & white by hand.

  5. Slides: choose Slide

    A slide is a positive, so the chip may name it a regular photo. Tap the chip and choose “Slide” in the Source menu. EditMe does not invert a slide. It does not switch to Slide on its own, so you choose it each time, or set “Slides” under “Most of my photos are”.

  6. Set the frame and the format

    If EditMe finds the edge of the picture, tap the chip “Border found” and choose Apply, or leave “Border removed” as it is. Adjust corners opens the Crop tool in Perspective mode, where you drag each corner into place. Formats are 35 mm, Half frame and 6×4.5 to 6×9, or Auto.

  7. Remove dust and adjust the look

    Open Dust in the tool strip below the photo, tap “Find spots” and tap the red rings you want repaired. Dust appears for black and white negatives and for slides. Then pick a finished look under Looks or use the sliders under Adjust.

  8. Save the photo

    Tap Save at the top right. EditMe creates a new photo next to the original and closes the editor. The original shot stays untouched.

Tips

  • The Colors and Color grading tools are offered only in colour mode, so a black and white negative does not show them.
  • For a negative, Looks has film looks in the groups Creative, Color film and B&W film. For a black and white negative, B&W film is selected first.
  • If a slide looks like a negative after you open it, it was inverted by mistake. Choose Slide in the Source menu.
  • To change the setting for one photo only, use the chip in the editor. The setting under Most of my photos are applies to new photos.

Questions

How do I invert a black and white negative on my iPhone?

Photograph it on an even white light, open the photo in EditMe and check that the chip at the top left says Black and white negative. If not, tap it and choose Black and white negative in the Source menu. EditMe inverts it without colour, and Save creates a new photo.

Does EditMe invert slides?

No. A slide is a positive and needs no inversion. Choose Slide in the Source menu behind the chip at the top left, and EditMe leaves it as it is. The Dust tool is then available for dust and lint.

Can EditMe tell a slide from a regular photo by itself?

No. EditMe tells colour negatives, black and white negatives and regular photos apart, but it never switches to Slide on its own. You choose Slide in the Source menu, or set Slides as the default under Most of my photos are in Settings.

What formats does EditMe handle for film?

35 mm, half frame, and medium format from 6×4.5 to 6×9. You set the format in the Crop tool, or leave it on Auto.